spec no: dsak7899 rev no: v.1 date: may/24/2010 page: 1 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011314 1.6x0.8x0.5mm bi-color surface mount led part number: APHB1608SGEC super bright green high efficiency red features z 1.6mmx0.8mm smt led, 0.5mm thickness. z compatible with reflow soldering z available in various color combination z package: 2000pcs / reel . z moisture sensitivity level : level 3. z rohs compliant. description the super bright green source color devices are made with gallium phosphide green light emitting diode. the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. package dimensions notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.15(0.006") unless otherwise noted. 3.the specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4.the device has a single mounting surface. the device must be mounted according to the specifications.
spec no: dsak7899 rev no: v.1 date: may/24/2010 page: 2 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011314 selection guide notes: 1. 1/2 is the angle from optical centerline where the lumi nous intensity is 1/2 of the optical peak value. 2. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. note: 1. 1/10 duty cycle, 0.1ms pulse width. part no. dice lens type iv (mcd) [2] @ 20ma v iewing angle [1] min. typ. 2 1/2 APHB1608SGEC super bright green (gap) water clear 18 60 high efficiency red (gaasp/gap) 7 15 130 symbol parameter device typ. max. units test conditions peak peak wavelength super bright green high efficiency red 565 627 nm i f =20ma d [1] dominant wavelength super bright green high efficiency red 568 625 nm i f =20ma ? 1/2 spectral line half-width super bright green high efficiency red 30 45 nm i f =20ma c capacitance super bright green high efficiency red 15 15 pf v f =0v;f=1mhz v f [2] forward voltage super bright green high efficiency red 2.2 2 2.5 2.5 v i f =20ma i r reverse current super bright green high efficiency red 10 10 ua v r = 5v parameter super bright green high efficiency red units power dissipation 62.5 75 mw dc forward current 25 30 ma peak forward current [1] 140 160 ma reverse voltage 5 v operating temperature -40c to +85c storage temperature -40c to +85c
spec no: dsak7899 rev no: v.1 date: may/24/2010 page: 3 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011314 APHB1608SGEC super bright green
spec no: dsak7899 rev no: v.1 date: may/24/2010 page: 4 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011314 high efficiency red
spec no: dsak7899 rev no: v.1 date: may/24/2010 page: 5 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011314 APHB1608SGEC reflow soldering is recommended and the soldering profile is shown below. other soldering methods are not recommended as they might cause damage to the product. recommended soldering pattern (units : mm; tolerance: 0.1) reel dimension tape dimensions (units : mm)
spec no: dsak7899 rev no: v.1 date: may/24/2010 page: 6 of 6 approved: wynec checked: allen liu drawn: f.f.zhou erp: 1203011314 packing & label specifications APHB1608SGEC
|
